|Availability:||Ships 1-2 days|
NEO SMART (BLUETOOTH 4.0/ANT+)
The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs.
The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch.
When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. Use the plug for an optimal cycling feeling, especially during your start. Also the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you.
Software Tacx apps & Third party apps. PC software via upgrade.
Resistance unit Direct drive
Realistic slope 25% 1
Descent simulation To -5%
Max brake power (10 sec.) 2200 Watt
Mass inertia 125 kg 2
1 With a total weight of 75 kg
2 Flywheel effect: the higher the value, the more realistic the cycling experience
Road surface simulation
The NEO is the only trainer with road surface simulation, allowing you to experience the feeling of riding on cobblestones, gravel, off road or other types of roads, all while you are indoors. You feel the vibrations of the road surface in your legs, exactly the way it would feel outdoors. This entirely new feature can be used with some Tacx Films when you ride in our virtual worlds and with Zwift.
Connect to Windows PC
Do you own a NEO Smart and are you looking to get more out of your trainings than the Tacx apps can provide? You can achieve this by connecting your trainer to your computer. That way, you can train using the Tacx Trainer Software 4, Advanced.
Instead of your tablet or smartphone, your computer is used to regulate your resistance and read out your performance data. For example, the computer software offers longer video’s in HD or Blu-Ray quality. While riding, the resistance on your rear wheel is adjusted automatically when the slope increases or decreases.
To connect the NEO Smart to your Windows computer, the Upgrade Smart is required. This package contains the Tacx Trainer software 4, Advanced, a control box to mount on your handlebar and the ANT+ Antenna.
The operating principle represents direct drive technology in its purest form. Any physical transmissions such as belts, rollers or wheels have been omitted in order to ensure optimum power efficiency, from the pedal to the motor. Thanks to an uninterrupted power flow, you won't lose a single bit of output or power.
A virtual flywheel dynamically controls the brake force. This means that the resistance is calculated and adjusted continually to simulate natural road resistance. Whereas other trainers use a flywheel to pass the dead centre, the NEO uses calculations to predict the movements of the bike and simulate the action of a flywheel. The inclusion of FAST technology means the NEO carries out a 1000 calculations per second to predict the rider's movement. The virtual flywheel can generate a variable inertia effect, allowing it to simulate the bike movements of all cyclists up to a specific bodyweight (125 kg max.) in a highly accurate manner.
When calculating the brake resistance required, all physical formulas a cyclist encounters on the road are applied to create a situation that is as realistic as possible. Air and rolling resistance, gradient percentage, weight, air pressure, wind speed, temperature, altitude, inertia and brake properties are all taken into account and calculated hundreds of times per second to achieve a realistic feel.
The direct drive is equipped with an LED light, which changes colour in response to your power. If your power output is high, the light turns red. If you are cycling at a low power output, the light is blue.
No cadence sensor is used to determine the cadence. As mentioned previously, the NEO performs a thousand measurements per second in order to predict the bike's movements. The sine modulation of the bike's movement is used to determine the cadence and the power output
SOFTWARE AND APPS
You may connect a Tacx Smart trainer to your smartphone, tablet or computer with ANT+ or Bluetooth® Smart in order to use our software and apps, or that of others. You may also use it stand-alone, without linking the trainer to a device. This means you are completely free to choose the software you want for your indoor cycling workout.
With our software and apps, you may regulate your training ride by heart rate, gradient and power, or you may pick a famous route or race. Besides that, you may compete with other riders online. The training options vary by application. Read more about our software here:
Tacx Training app > for smartphones (free)
Tacx Cycling app > for tablets (free)
Tacx Trainer software > for Windows PC
All of our trainers are freely accessible since June 2015 as they are able to speak the ANT+ FE-C language. You can now adjust the resistance of our Smart trainers and check your speed, cadence and power with other software. The following software packages speak this new language too and allow you to control our trainers:
Trainer Road >
For more information on the open communication protocol, click here
The NEO has an universal EDCO Multisys body that fits all Shimano and SRAM cassettes, and most Campagnolo cassettes. Whether it fits depends on the amount of cutouts inside the cassette. Campagnolo cassettes with 8 cutouts, like the 10 speed Veloce, won’t fit unfortunately. Below is a list of what fits and what doesn't fit.
In addition, the NEO is placed in between your rear fork. Unfortunately, the NEO doesn’t fit some bikes with an integrated rear brake or curved seat stays. To find out if the NEO fits in between the rear fork of your bike, you can use one of the stencils below.
Axle 130mm (pdf)
Axle 135mm (pdf)